Winter projects

Questions and Answers about Maintenance, Mods and Repairs

Moderators: Loose Ends, John S

Post Reply
Bruce L
Posts: 89
Joined: Tue Jan 03, 2012 11:32 pm
Location: Vancouver

Re: Winter projects

Post by Bruce L » Wed Jan 23, 2013 4:55 am

The only project I have on the books is to replace my wheel well.

It took a bit of a beating this past year

Shawn B
Posts: 13
Joined: Thu Apr 19, 2012 5:33 am
Location: Surrey, BC

Re: Winter projects

Post by Shawn B » Mon Mar 04, 2013 4:36 am

Any idea how much torque is needed for lug nuts with an aluminum rim?

User avatar
John S
Posts: 136
Joined: Wed Jan 04, 2012 2:33 am
Location: Langley

Re: Winter projects

Post by John S » Mon Mar 04, 2013 5:27 am

Most are around 70 to 75 ftlbs. I would say if you do them to 70 ftlbs you will be good . For steel rims 50 to 55 ftlbs. Hope this helps.

Shawn B
Posts: 13
Joined: Thu Apr 19, 2012 5:33 am
Location: Surrey, BC

Re: Winter projects

Post by Shawn B » Tue Mar 05, 2013 6:39 am

Thanks John

User avatar
T.O.P
Posts: 15
Joined: Fri Mar 02, 2012 2:23 am
Location: Mission
Contact:

Re: Winter projects

Post by T.O.P » Tue Mar 05, 2013 6:58 am

To much to list but here goes.

1. Send Shock to GT Thunder for repair and customization - Done and installed
2. Setup and install Snow Plow on Utility quad - done and installed, for what? No snow
3. Repair and upgrade muffler on utility quad - in progress
4. re-tap oil drain plug on sport quad - have all parts, on todo list
5. Replace Brake Disk and protective cover - Done
6. Replace rear brake cable - in progress
7. Change rear diff fluid on all utility quads - on to do list.
8. Charge up all batteries. - in progress
9. Change oil/filter on all quads - good greif...
10. replace grips on Utility - on todo list.

11. Go rob a bank to get the rest of the list done! 8-)
T.O.P
The OP
Life is either a daring adventure or nothing - Helen Keller

Bruce L
Posts: 89
Joined: Tue Jan 03, 2012 11:32 pm
Location: Vancouver

Re: Winter projects

Post by Bruce L » Wed Mar 06, 2013 1:53 am

Get some for me tooooo!!!! :evil:

Post Reply