Looking to get a better tire in near future, not into the technical stuff looking more for sand,snow and hard trails. Any suggestions and best place to buy? Thanks I will have to work on shrinking pics.
Tires
Moderators: Loose Ends, John S
Re: Tires
Welcome. I have found one of the best all-round replacement tire to be the Maxxis Bighorn. The best place to buy them for price is https://www.rockymountainatvmc.com/p/43 ... l-ATV-Tire but you will have to ship them to USA post box. If you buy them up here you will pay almost double.
- westcoastjack
- Posts: 43
- Joined: Sat Dec 28, 2013 2:34 am
Re: Tires
Heh check out casterland...that's right I said casterland
web presence;
http://www.casterland.com/Products/STT/ ... heels.html
The are in surrey find what you like and they just might have it.
web presence;
http://www.casterland.com/Products/STT/ ... heels.html
The are in surrey find what you like and they just might have it.
get dirty,clean,repeat
- westcoastjack
- Posts: 43
- Joined: Sat Dec 28, 2013 2:34 am
Re: Tires
These are my tires and this is a Canadian site I do incline rocks sticks and snow with these had em for 2 years...came with the bike.
http://www.canadasmotorcycle.ca/itp-ter ... MgodI3oALg
This is a link same site to maxxis bighorn style
http://www.canadasmotorcycle.ca/catalog ... is+bighorn
http://www.canadasmotorcycle.ca/itp-ter ... MgodI3oALg
This is a link same site to maxxis bighorn style
http://www.canadasmotorcycle.ca/catalog ... is+bighorn
get dirty,clean,repeat
- westcoastjack
- Posts: 43
- Joined: Sat Dec 28, 2013 2:34 am
Re: Tires
Thanks for the info, I will have to make a decision before we go on anything too rocky etc. cause these stock tires seem kind of wimpy. I am installing fender extenders on my bike cause last time out I came back covered in mud and my wife was clean as a whistle. These are made and sold in Canada and seem to be good.
They fit nice and bolt on, I used a soldering iron from behind to poke a hole through then drilled from the front.
They fit nice and bolt on, I used a soldering iron from behind to poke a hole through then drilled from the front.